PumpToys prides itself on unbeatable customer service and professional quality products for pumpers. We value our customer's confidence highly, and reflect that in everything we do. PumpToy's customers heartily approve! Here's a sample of what they have to say:

• Customer service was above and beyond, Dave will work with you to get you what you need Posted by: Chris
  I had custom requests that I wanted and wasn't sure if PumpToys could accommodate. Dave went out of his way to accommodate both requests and literally gave me the best customer service I have ever experienced - not exaggerating one bit. PumpToys is among the last bastion of good, American-based businesses with American made products. It's like the good ol' days, only you couldn't buy penis pumps in the good ol' days. He also called me up on the phone to discuss my custom requests in detail, and his email responses were always detailed and very thought out - you can tell this company cares. I highly recommend PumpToys to any pumpers not only because of this level of service, but also because of their product selection. It's the best and widest I've seen. I don't know of any other companies who are offering something like the EZ angle entry or the Glans Xpands Pro (they have many other unique products as well, but this is what I bought). Five stars, would give them six if I could. Thank you Dave!
  
  
• Posted by: PD
  RE- Your wonderful tube. The VelSeal cylinder and pump with gauge is a joy to use. This bit is for Dan: I've been into PE for exactly 3 yrs this month. Started as 5 3/4" by 4" and currently go 8" x 6". The 8" however is only when pumped up inside the cylinder, outside with normal erection I only go 7.5"
  
  
• Posted by: Rac
  I've spent the last two hours testing my new seal, and it's great. Not a leak with my STJ or 3.5 tubes. It is exceptionally comfortable. I expect to spend the rest of the day (and maybe, night) in it. Yes, Bagman did a great job with it; and no, I was not paid for this. Get one if you can!
  
  
• Posted by: MF
  Dan, The BullMaster Cylinder arrived today. I've never pumped so large, WOW! Thanks!
  
  
• Posted by: Ken
  I just tried my sun tea jar SEAL that I bought from the Bagman at Precision Seal; it is great. Very very comfortable. I can pump longer, harder and more often without getting sore from the jar opening edge. It's a must for stj pumpers, worth every penny.
  
  
• Posted by: Mike'sMonster
  I have lots of tubes, including both Monstertubes- but nothing has worked like the Bull Master. Like you said, I come out looking better- FAR better! It's a GREAT product, and the workmanship is first-class.
  
  
• Posted by: Gulfer
  I received my STJ Seal today and couldn't wait to try it. It's so comfortable and efficient that it greatly increases the pleasures of pumping. I believe that it has become a must when pumping with STJs or larger tubes. Many thanks to you Bagman!
  
  
• Posted by: luvmfat
  Just tried mine last night. Works great! Seals perfectly and the opening is sized just right to keep your abdomen from being pulled in. Gives your sack a nice shape. I'm no relative, salesman or business partner. Just a satisfied customer offering feedback on a well-made product. Thanks again, Bagman!
  
  
• Posted by: Bonkers
  I have just finished my third session in my new BULL cylinder. It takes me a while to get big enough to start hitting the contours, but then it starts moving to the shapes, just like you said it would. I still haven't filled it up, but I see a remarkable difference when I come out. Can't wait to get it full to the brim! Wild product, great job. Thanks!
  
  
• Posted by: Brian
  I received the STJ Seal yesterday and was able to try it out this morning. Fits perfectly and was really comfortable. Best part though, was that I was able to pump my balls up an additional 3" more than I am usually able to, in the same amount of time. What a feeling!! So if you're able to get one of these seals, definitely get yourself one.
  
  LETTER From a Monstertube User:
  Subject: Got my MT3 Seal - WOW!
  Hi Bagman!
  I got my MT3 seal in the mail today at lunch, and had to stay and try it out immediately. All I can say is WOW! I only pumped for an hour and a half, and got bigger than ever before. The comfort is amazing! The only reason I stopped was so as not to get carried away, since I know I'm being stretched in a different way now with the seal in place. More stretch of my sac and very little if any of my groin. So I stopped, checked things out, and boy am I happy with the results. I feel a lot more comfortable now and know that I can go for dramatically longer sessions in coming days. The only real difficulty was with my Monster tube, not with the seal. I think you were getting at this on the enclosed instruction sheet. At the opening of the Monster tube, where the two halves clamp together, there is a tendency for a gap in the Monster tube's seal between the halves. Normally so much of my groin gets pulled in that my deformed groin was in fact providing the vacuum seal at that point. With the MT3 seal, my groin doesn't pull in, so I could see it wouldn't provide the seal. I cut off two small pieces of inner tube (about 1/2" square) and inserted them along the Monster tube's sealing surface at the two spots where it meets the opening. That worked fine. In fact, for the second session after my break, I just used this on the side away from the hinge.
  
  I may be able to dispense with this if I redo the Monster tube's seal again. I replace it every few weeks anyway, as the original disintegrated a long time ago. I use a kind of self adhesive foam weatherstrip I get at the hardware store. I tend to cut this seal short so the projecting edge wouldn't bother me. That is surely a moot point now, as the tube is at least an inch away from my groin now.
  
  I wonder how big I can get and still pull my balls back through the MT3 seal. I get I'll cross that bridge when I come to it. I do think I may want to order a spare MT3 seal from you, because I am so hooked on this I wouldn't want to miss pumping waiting for another seal to arrive if I broke this one. Thanks so very much for developing these soft seals, they sure are wonderful. On to bigger and bigger balls with your help!
  Paul
  
  
• Posted by: Bawcock
  Got mine last night with a 5" cast STJ Acrylic (near optical quality) cylinder and the 4" neck size for the STJ Seal. The Seal is so thick and soft it makes hanging the heavy thick-walled 2-stage a cumfortable pleasure. I liked the idea when I first heard about it and the product is even better than I had hoped. Bagman has provided all of us 2-stage pumpers with an excellent cock favor. I pumped up last night alternating in the Seal Tube and CTC Ultra-Maximizer on the cock. The result was fantastic. I'm in the Seal Tube now and you could almost forget it was there (a little too cumfortable to actually forget). It's like wearing a portable display case for your cock and balls.
  Bawcock
  
  
• Posted By: BawCock
  Feel Like a Seal- My Seal Tube sure makes me feel like one. Bagman's STJ Seal in combo with the Display Case STJ tube he made for me is a basket builder of the first order. I even bought a new pair of sweat pants to show it off. This tube is so huge and cumfortable that I wear it to bed knowing that I'll knock it off if I doze off. Feels great drifting cumfortably off to dreamland with huge meat. Bawcock
  
  
• Posted By: lil'Big'un
  You guys take a long time to get your products developed, but when your done, they are always outstanding. I have used my new set of VelSeal tubes for about two weeks now, and they work better than anything I've used over the 10 years I've been pumping. Far more comfortable, and far less hassle- and far better results. Awesome job, guys!
  
  
• From: Bill
  Bagman- I finally got a chance to try the new STJ seal I purchased from you. It is great, very comfortable and can be used for a long period without discomfort. I pumped at low pressure for 3 hours (taking 5 minute breaks). I had a tough time getting out of the jar! I took me almost 1/2 hour, pulling, adding lubricant and pressurizing to get out. When I finally got them out, they measured 18.5" around. That was the horizontal measurement, they were hanging much longer and in a gourd shape. When I sat on the toilet, they touched the water!
  Thanks for the great seal!
  
  
• From: Shawn
  Now I'm sorry I didn't mail my order sooner.. I got the seal and wow! I love it!! It's so comfortable and effective.. Certainly past my expectations! Thanks! :)
  
  
• Posted by: alecsmart
  bagman, just got my ball-ringer kit yesterday. Have worn it all day at work, and it's soooo much better than using regular rings. Great idea! Thanks
  
  
• From: BeaverBoy
  The Acrylic cylinder is great. Super clear, and a joy to get out of thanks to your seal! I've used my 3x5 for the last time, this is so much better. Great site too, keep it growing!
  
  
• From: TXtommy
  Absolutely love my new Long-Johnny cylinder! I'm finally seeing a long look when I come out instead of a balloon-shaped package. With the seal, it comes out heavy at the bottom, narrower at the neck. Look out, Pekka- I'm your new competition!

Thanks to everyone who's written us!
We would love to hear from you too; tell us how you like your PumpToys products!